Xerox DocuPrint 180 manual Refer to the Xerox DP 180 LPS Operator

PRODUCT DIFFERENCES/USER CONSIDERATIONS

Table 5-3.Will this 4650 (V3.5) job print on my DP 180 LPS?

Job features from 4650
(V3.5)	Results when run on DP 180 LPS)
Clusters	Job prints. Operator needs to redefine
	clusters if tray differs.
Edgemarking	Job prints.
Fonts	Job prints if the fonts and character sets
	used are loaded on the DocuPrint 180
	LPS or if sub-stitutions for these fonts
	are defined.
Graphics	Job prints if sufficient graphic memory is
	available and input source is 300 dpi
	resolution.
Labels	Job prints using only paper-faced labels.
	Refer to the Xerox DP 180 LPS Operator
	Guide for loading instructions.
Page density	Job prints.
Paper sizes	Job prints.
Paper stock	Job prints if it does not use edge
	reinforced 3-hole stock.
Stitch commands	No stitcher available on DP 180 LPS,
	therefore stitch commands are ignored
	and job prints unstitched.
600 dpi input	Job prints in 300 dpi. The 4650 LPS is
	the only Xerox LPS that accepts 600 dpi
	input.
300 dpi with interpolated	Job prints.
600 dpi output

XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE 5-5