XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
System controller panel As shown in figure 3-3, the system controller is powered on or off, booted, and switched between local and remote using the buttons on this panel.
Figure 3-3.System controller panel
1Power On switch
2Power Off switch
3Power On indicator
4Boot switch
5Remote switch and indicator
6Local switch and indicator
PC UI Your Xerox DocuPrint 180 LPS has a PC UI connected to the system controller.
The PC UI is an IBM-compatible Pentinum-based personal computer (PC) with a 100 MB or larger hard disk, 3.5-inch floppy disk drive, keyboard, color monitor, mouse, and a mouse pad. The PC UI allows you to communicate with the Xerox DocuPrint 180 LPS, to start and monitor print jobs. Tasks are performed through a dynamic set of windows and graphic objects displayed on the PC UI screen. Windows and options are selected with the mouse pointing device or by pressing certain keys on the keyboard. You can also key in commands through a command line window on the PC UI display screen.
Figure 3-4 shows the Xerox DocuPrint 180 LPS PC UI.
Figure 3-4. PC UI
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE | 3-3 |