Xerox DocuPrint 180 manual Refer to the Xerox DP 180 LPS Operator

PRODUCT DIFFERENCES/USER CONSIDERATIONS

Table 5-4.Will this 4850 (V3.7) job print on my DP 180 LPS?

Job features from 4850
(V3.7)	Results when run on DP 180 LPS
Clusters	Job prints. Operator needs to redefine
	clusters if trays differ.
Color	Jobs will compile, process and print in
	black ink and shades of gray. The
	system will alert the operator if a job will
	not print correctly, but the system will not
	roll over. Precompiled color forms will
	print in black and shades of gray,
	however, the DP 180 LPS does not
	compile color forms.
Edgemarking	Job prints.
Fonts	Job prints if the fonts and character sets
	used are loaded on the DocuPrint 180
	LPS or if sub-stitutions for these fonts
	are defined.
Graphics	Job prints if sufficient graphic memory is
	available.
Labels	Job prints using only paper-faced labels.
	Refer to the Xerox DP 180 LPS Operator
	Guide for loading instructions.
Paper density	Job prints.
Paper sizes	Job prints.
Paper stock	Job prints.
Stitch commands	No stitcher available on DP 180 LPS. As
	a result, stitch commands are ignored
	and job prints unstitched.

5-6 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE