Xerox DocuPrint 180 manual To the Xerox DP 180 LPS Operator

PRODUCT DIFFERENCES/USER CONSIDERATIONS

Table 5-2.Will this 4050/4090 (V3.5) job print on my Xerox

DocuPrint 180 LPS

Job features from 4050/
4090 (V3.5)	Results when run on DP 180 LPS
Programmable bypass	Job prints if DP 180 LPS has a bypass
transport	transport and the finishing device is
	required by the job. Otherwise, it does
	not run.
Clusters	Job prints. Operator needs to redefine
	clusters if trays differ.
Edgemarking	Job prints
Fonts	Job prints if the fonts and character sets
	used are loaded on the DocuPrint 180
	LPS or if substi-tutions for these fonts
	are defined.
Graphics	Job prints if sufficient graphic memory is
	available.
Labels	Job prints using only paper labels. Refer
	to the Xerox DP 180 LPS Operator
	Guide for loading instructions.
Page density	Job prints.
Paper sizes	Job prints.
Paper stock	Job prints if it does not use edge
	reinforced 3-hole stock.
Stitch commands	No stitcher available on DP 180 LPS,
	therefore stitch commands are ignored
	and job prints unstitched.
Transparencies	Job prints.

5-4 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE