Maintenance
To replace the roller assembly:
1.Open the Automatic Document Feeder cover.
2.Take out the paper input tray.
The roller is located in the body of the scanner behind the input tray.
3.The roller is held in place with a lock tab that rotates to lock and unlock it. To unlock the tab, rotate it upward until the small lock flange is completely free.
4.Gently press the roller to the right to free its left side. Then angle the roller to the front of the scanner until it is clear of the housing, and bring it out and away from the scanner body.
5.Discard the worn roller. It cannot be repaired.
6.Before installing the new roller, clean any dust that may have gotten on it during shipping.
DocuMate 150 Scanner User’s Guide | 69 |