Xerox 8850, 8825, 8830, X2 manual Making copies, Scanner Control, 4AUTOSCAN, Document Return: Front

Making copies

Making copies

Controlling the scan

When the Graphical Display indicates READY TO COPY, the WIDE FORMAT COPY SYSTEM is ready to make copies.

NOTE: The X2 TECH printer does not currently support the Copying mode.

Several settings are available for controlling how the Scanner starts and finishes a scan. These settings are accessible from the SCANNER CONTROL option of the CONFIGURATION menu.

SCANNER CONTROL

4 AUTOSCAN

DOCUMENT RETURN: FRONT

MODE: PRODUCTIVITY — ARCH

When making a copy, you need to be aware of these settings. If any of these settings have been changed from the default settings, the Scanner may not operate according to your expectations.

Below is a brief summary of the scan control settings. For complete information about these settings, refer to "Scanner Control" in the "Main Menu" section of this manual.

AUTOSCAN

AUTOSCAN enabled is the default setting. Normally, the AUTOSCAN mode is enabled. When it is enabled, the Scanner automatically begins the scanning of a document when the document is inserted. If AUTOSCAN is disabled, the Scanner transports the document to the starting position and then waits for you to press the Start key before beginning the scan.

DOCUMENT RETURN

FRONT is the default setting. When the DOCUMENT RETURN feature is set to FRONT, the Scanner returns the document to the front or

XEROX WIDE FORMAT COPY SYSTEM Making copies ∙ 47