Agilent Technologies 5975 Laboratory Supply Requirements, Cleaning solvents, Data system supplies

Page 33

Site Preparation

Laboratory Supply Requirements

Laboratory supply requirements vary with applications.

Cleaning solvents

Cleaning tasks for the MSD require the following HPLC-grade (or better) solvents:

•Methylene chloride

•Isopropyl alcohol

•Methanol

•Acetone

•Water

Proper storage, handling, and disposal of these chemicals is required for personal and environmental safety.

	C A U TI O N	Do not use carbon disulfide as a cleaning solvent on or around the MSD. It is corrosive
	C A U TI O N	and will damage the analyzer. Use of carbon disulfide as a cleaner will void the

		warranty on the analyzer.
		Carbon disulfide may be used as a sample solvent in standard size injections (typically
		2 µL or less).

		Chemical solvents should be considered hazardous and must be handled with care.
	WA R N I N G
	WA R N I N G	Contact your chemical supplier for solvent handling and safety information,

		preferably a material safety data sheet (MSDS).

Data system supplies

You will need paper for printing the results of the testing done during installation and later for printing reports of your analyses. You will also need appropriate supplies for making backup copies of your data files.

Site Preparation Guide

33

Image 33

Contents Series Mass Selective Detectors U TI O N WA R N I N G Contents Power Cords General Information Model number Product number Pump type Ionization mode Instrument IdentificationMSD versions Many internal parts of the MSD carry dangerous voltages Important Safety WarningsMany parts are dangerously hot Electrostatic discharge is a threat to MSD electronicsWhen hydrogen gas is supplied to the instrument Hydrogen SafetyChemical Safety Information Safety and Regulatory CertificationsSymbols Sound emission declaration Electromagnetic compatibilityRecycling the Product CleaningSite Preparation Customer responsibility OverviewAgilent responsibility Compliance must exist prior to installationAnalysis Consulting services Other documentation Series MSD Troubleshooting and Maintenance ManualSpace and Weight Requirements Series MSD Series GC Computer with monitorALS tray Product dimensions Communications Requirements TelephoneSite LAN network Voltage ranges of major components Electrical RequirementsConfiguration Measurement Nominal voltage Power configurationsSupply Outlets Power consumption Power requirementsProduct Line voltage RequiredSupply Outlets Power consumption Circuit rating Required Power plugs and cordOther electrical considerations Temperature, humidity, and altitude Temperature Humidity relativeAir Conditioning and Environmental Requirements Exhaust venting Airborne dustFume exhaust hood Purity Typical pressure range Typical flow, mL/min KPa psi Carrier and Reagent Gas RequirementsRegulators, tubing, and fittings Cleaning solvents Laboratory Supply RequirementsData system supplies Spare parts and consumables Part numberMiscellaneous consumables Chemical Consumables Commonly used toolsFerrules 5062-3506 Receiving the System Delivery and unloadingInspecting for damage Unpacking StorageInstallation and Verification InstallationVerification Sensitivity specifications Power Cords Power Cords Page Agilent Technologies