Agilent Technologies G1978B setup guide Content

Content

1	Installation	7
	Installation	8
	Step 1. Prepare to install			8
	Step 2. Install the HV control PCA and cables				9
	Changing Sources		13
	To remove the multimode source 13
	To convert from multimode to ESI, APCI or APPI				14
	To convert from ESI, APCI or APPI to the multimode source					15
2	Verification	21
	To verify sensitivity for 6120 Quad - G1978B Multimode, Positive SIM
	Modes	22
	To verify sensitivity for 6130 and 6140 Quads - G1978B Multimode, Positive SIM
	Modes	24
	To verify sensitivity for 6130 and 6140 Quads - G1978B Multimode, Positive
	Scan Modes		27
	To verify sensitivity for the G1978B Multimode using Multiple FIA method in
	Mixed Mode operation			30
	To do an autotune		32
	Example of multimode verification report 33
3	Methods 35
	To setup a method to use the multimode source				36
	To create a method for positive/negative mixed mode operation 37
	To create a method for alternating ESI and APCI operation					39

Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 5