Belkin F1DA104PEA, F1DA116PEA, F1DA108PEA user manual Step-by-Step Installation Guide

Installation

Step-by-Step Installation Guide

Cautions and Warnings:

Before attempting to connect anything to the PRO2 PS/2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the PRO2 PS/2(s). Belkin Components is not responsible for damage caused in this way.

Installing the PRO2 PS/2 into a Server Rack:

Bracket Installation (F1DA108Pea and F1DA116Pea only)

Eight- or 16-Port PRO2 PS/2s include adjustable mounting brackets ideal for

installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow the faceplate of the PRO2 PS/2 to mount flush to your rack-mounted servers, or to the rack. Please follow these simple steps to achieve the desired adjustment. The 4-Port PRO2 PS/2 requires an optional mounting kit (F1D005).

1

2

3

4

5

6

7

8

9

10

section

1.Remove the adjustable brackets from the box. (The adjustable brackets allow you to set the PRO2 PS/2’s face flush with the ends of the rails or to extend the PRO2 PS/2 past the front of the rails).

2.Determine how far you would like the PRO2 PS/2 to protrude from the rack.Select a bracket-hole scheme.

3.Attach the bracket to the side of your PRO2 PS/2 using the Phillips screws provided. (Refer to diagram above).

4.Mount the PRO2 PS/2 to the rack rail assembly.

Note: If this PRO2 PS/2 will be daisy-chained to another PRO2 PS/2, set the BANK address prior to installing on a rack. Refer to the section in this user manual labeled “Connecting Multiple PRO2 PS/2s (Daisy-Chaining)”.

9