Belkin F1DA116PEA, F1DA108PEA, F1DA104PEA user manual Keyboard Hot Key Commands

Using your PRO2 PS/2

The “BANK –” button will take you to the previous BANK. For example, when you are at BANK 02 and want to check computers in BANK 01. Pressing the “BANK –” button will take you to BANK 01. As default, the first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 01.

Keyboard Hot Key Commands:

Conveniently command the PRO2 PS/2 to switch ports through simple keyboard key sequences. To send commands to the PRO2 PS/2, the “Scroll Lock” key must be pressed twice within two seconds. You will hear a beep for confirmation. Below is a complete list of hot key commands:

Note: you will have approximately five seconds to complete each hot key sequence.

SL	SL	Up Arrow		Switch to PREVIOUS ACTIVE port
SL	SL	Down Arrow		Switch to NEXT ACTIVE port
SL	SL	Page Up		Switch to PREVIOUS BANK
				(By default, selects first active port
				on the BANK)
SL	SL	Page Down		Switch to NEXT BANK
				(By default, selects first active port
				on the BANK)
SL	SL	Y		Directly switches to PORT Y on BANK 00
(Single-Switch Configuration)				Y=01 to 16
SL	SL	X	Y	Directly switches to PORT Y on BANK X
(Daisy-Chain Configuration)				(X=00 to 15) (Y=01 to 04 for F1DA104T)
				(X=00 to 15) (Y=01 to 08 for F1DA108T)
				(X=00 to 15) (Y=01 to 16 for F1DA116T)
SL	SL	Delete		Reset On-Screen Display menu
SL	SL	S		Disable sound in AutoScan mode
SL	SL	Space Bar		Activate On-Screen Display
SL	SL	A		Enable AutoScan mode
				(Refer to AutoScan button)

1

2

3

4

5

6

7

8

9

10

section

19