Belkin F1DA104PEA, F1DA116PEA, F1DA108PEA user manual PRO2 PS/2 series FAQs

Page 29

PRO2 PS/2 series FAQs

Q: How far can the computer be from the PRO2 PS/2?

A:When using PS/2 connections, the PRO2 PS/2 can be up to 25 feet away from your computer. If your computer needs to be more than 25 feet (7.5 meters) from the PRO2 PS/2, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 300 feet away using a standard CAT5 UTP cable.

Q: What is the maximum video resolution that the PRO2 PS/2 supports?

A:The advanced video circuit in the PRO2 PS/2 supports a maximum resolution of 2048x1536@85Hz.

Q: What video bandwidth does the PRO2 PS/2 support?

A: The PRO2 PS/2 supports 400MHz of video bandwidth.

Q: Do I have to install any software to use the PRO2 PS/2?

A:No, the PRO2 PS/2 does not require any drivers or software to be installed in your computers. Simply connect all your computers to the PC ports on the PRO2 PS/2, then attach one keyboard, monitor, and mouse to the Console port and it is ready for use.

1

2

3

4

5

6

7

8

9

10

section

27

Image 29
Contents PRO2 PS/2 Table of Contents Overview Package ContentsOverview LED Display Front-Panel Push ButtonSeven-Segment LED Display Equipment Requirements CablesKeyboards OmniView All-In-One PRO Series PlusMice MonitorSide View of the PRO2 PS/2 Back View of the PRO2 PS/2 Front View of the PRO2 PS/2Port LED Indicators Max. Resolution 2048x1536@85Hz Bandwidth 400MHzDimensions WeightCable Distance Requirements InstallationPre-Configuration Where to Place the PRO2 PS/2 Step-by-Step Installation Guide InstallationConnect the Console Single PRO2 PS/2 InstallationConnect the Computer Connecting Multiple PRO2 PS/2s Daisy-Chaining Example Bank DIP Switch Configuration ChartAdding Additional Slave Units Connecting the Master Switch to the First Slave SwitchBefore You Begin Connecting the Computers Example of Daisy-Chain ConfigurationPowering up the Systems Using your PRO2 PS/2Selecting a Computer Using Keyboard Hot Key Commands Using your PRO2 PS/2Bank Up and Bank Down Scroll Buttons AutoScan ModeSelecting a Computer Using Direct-Access Port Selectors Keyboard Hot Key Commands On-Screen Display Menu Control AutoScan Time To update the firmware, you will need the following itemsOSD Display Time Updating FirmwareDIP Switch Firmware Connecting ComputersSetting the PRO2 PS/2 into Flash Mode OmniView KVM Switches Belkin KVM switches and accessoriesBelkin KVM switches and accessories OmniView All-In-One KVM Cables PRO2 PS/2 series FAQs PRO2 PS/2 series FAQs PRO2 PS/2 series FAQs Am getting a black screen on my monitor TroubleshootingMouse Mouse is lost when I switch to a different port TroubleshootingComputer boots up, but the mouse does not work Mouse is not detected at boot-upBelkin Components Limited Three-Year Product Warranty Warranty, FCC, CE, Ices StatementFCC Statement F1DA104P, F1DA108P, F1DA116PWarranty, FCC, CE, Ices Statement Belkin GmbH