Belkin F1DA116PEA Computer Connections Supported, Keyboard Emulation PS/2 Mouse Emulation PS/2

Page 9

Overview

Specifications

Part No.: F1DA104Pea, F1DA108Pea & F1DA116Pea

Power: 12-Volt DC, 1-Amp power adapter with center-pin positive

polarity Daisy-Chain:Maximum of 16 KVM Switches

Computer Connections Supported:

4(F1DA104Pea)

8 (F1DA108Pea)

16 (F1DA116Pea)

Keyboard Emulation: PS/2

Mouse Emulation: PS/2

Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be required)

Max. Resolution: 2048x1536@85Hz

Bandwidth: 400MHz

Keyboard Input: 6-pin miniDIN (PS/2)

Mouse Input: 6-pin miniDIN (PS/2)

VGA Port: 15-pin HDDB type

Port LED Indicators:

4(F1DA104Pea)

8 (F1DA108Pea)

16 (F1DA116Pea)

Enclosure: Metal enclosure with high-impact plastic faceplate

Dimensions:

(F1DA104Pea) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm) (F1DA108Pea)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x 190mm)

(F1DA116Pea) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm)

Weight:

(F1DA104Pea) 5.3 lbs. (2414.5 grams)

(F1DA108Pea) 9.2 lbs. (4181.5 grams)

(F1DA116Pea) 12 lbs. (5472.5 grams) Operating Temp.: 32º to 104º F (0~40º C) Storage Temp.: -4º to 140º F (20~60º C) Humidity: 0-80% RH, non-condensing

Warranty: 3 years

Note: Specifications are subject to change without notice.

1

2

3

4

5

6

7

8

9

10

section

7

Image 9

Contents PRO2 PS/2 Table of Contents Overview Package ContentsOverview LED Display Front-Panel Push ButtonSeven-Segment LED Display Equipment Requirements CablesKeyboards OmniView All-In-One PRO Series PlusMice MonitorSide View of the PRO2 PS/2 Back View of the PRO2 PS/2 Front View of the PRO2 PS/2Port LED Indicators Max. Resolution 2048x1536@85Hz Bandwidth 400MHzDimensions WeightInstallation Pre-Configuration Where to Place the PRO2 PS/2Cable Distance Requirements Step-by-Step Installation Guide InstallationConnect the Console Single PRO2 PS/2 InstallationConnect the Computer Connecting Multiple PRO2 PS/2s Daisy-Chaining Example Bank DIP Switch Configuration ChartConnecting the Master Switch to the First Slave Switch Before You BeginAdding Additional Slave Units Connecting the Computers Example of Daisy-Chain ConfigurationPowering up the Systems Using your PRO2 PS/2Selecting a Computer Using Keyboard Hot Key Commands Using your PRO2 PS/2AutoScan Mode Selecting a Computer Using Direct-Access Port SelectorsBank Up and Bank Down Scroll Buttons Keyboard Hot Key Commands On-Screen Display Menu Control AutoScan Time To update the firmware, you will need the following itemsOSD Display Time Updating FirmwareConnecting Computers Setting the PRO2 PS/2 into Flash ModeDIP Switch Firmware OmniView KVM Switches Belkin KVM switches and accessoriesBelkin KVM switches and accessories OmniView All-In-One KVM Cables PRO2 PS/2 series FAQs PRO2 PS/2 series FAQs PRO2 PS/2 series FAQs Am getting a black screen on my monitor TroubleshootingMouse Mouse is lost when I switch to a different port TroubleshootingComputer boots up, but the mouse does not work Mouse is not detected at boot-upBelkin Components Limited Three-Year Product Warranty Warranty, FCC, CE, Ices StatementFCC Statement F1DA104P, F1DA108P, F1DA116PWarranty, FCC, CE, Ices Statement Belkin GmbH