Belkin F1D001 user manual EPowerSwitch Function ID Address Outlet 01-16

Page 32

28

ePowerSwitch	ePowerSwitch	Function
ID Address	Outlet
XX	X	X
01-16	1-8 ? A-H	0-Off
	9 ? All	1-On
		2-Reset

Every command must add “#” in the end.

Eg, 0111# turn on ePowerSwitch01, outlet A, 0120# turn off ePowerSwitch01, outlet B, 0142# to reset ePowerSwitch01, outlet D (turn off

immediately, and on after 10 seconds )

Remote user may punch in 8 digits to delay reset, on or off. Eg,

02813600# means turn ePowerSwitch02 outlet H on after 3600 minutes.

02803600# means turn ePowerSwitch02 outlet H off after 3600 minutes.

02823600# means reset ePowerSwitch02 outlet H after 3600 minutes.

Use combination of 0111XXXX# and 0112XXXX# to get different delay for reset, or create a longer command.

XXXXmax value is 9999, which is about 166 hours, or 6.94 days.

7.The ePowerSwitch will acknowledge received commands by issuing 2 short beeps otherwise a long beep indicate failure or not recognizable.

8.Change password. The default password is 123456789. User has to enter previous password in order to change password.

28

Image 32

Contents EPowerSwitch Conventions Used In This Guide Table of Contents Appendix EPowerSwitch Features IntroductionSwitch Status LEDsRJ 11 Jacks EPowerSwitch System Unit EPowerSwitch System PackageEPowerSwitch System Package Contents One 3.5 Diskettes IP Setup Setup via Ethernet portUse Web browser to set IP, gateway and subnet Setup via serial port Page Page Serial or Telnet Configuration Use terminal to set IP, gateway and subnetIP Address for the ePowerSwitch System and More Setup via USB port Page Telnet Options Setup via Ethernet Cascaded Cable Ethernet Cascaded Cable. Not EncloseConfiguration PPP ConfigurationRemote operation procedure User Management Software Update EPowerSwitch Configuration Page Scheduled shutdown Verify The ePowerSwitch Operation Set RS232 Serial Port Console Upgrade Upgrade Firmware Tftp Upgrade User data are lost Telephone access interface Telephone InterfaceEPowerSwitch Function ID Address Outlet 01-16 Page Appendix ReferenceCommunities IP AddressesSubnetting and Subnet Masks Value Purpose Subnet maskingRouting and Filtering Gateways Glossary NMS Network Management StationPage Troubleshooting