9.User enter 888XXX…..# or whatever previous password, then ePowerSwitch responds with three short beeps acknowledge access granted. Then user enter new password as following:
888XXXXXXXXXX#, and ePowerSwitch acknowledge 2 short beeps, sounds like “what?” and user input 888XXXXXXXXXX# the second time to
10.Hang up to close access.
11.Each command string should be entered within 20 seconds, the ePowerSwitch in a waiting loop to receive command. After 180 seconds without user input, the device will logout user.
12.“000#” key force to logout.
13.*” key cancel keyin error .
14.User interface use minutes as unit.
29