Belkin F1D001 user manual One 3.5 Diskettes

Page 9

for 10Base-T networks. Once connected, it is possible to use the ARP command to set IP address through the network interface.

USB Connector – The USB port provides quicker setup compared to the serial setup process. The USB driver files and setup software are both included on the floppy. Users are encouraged to use USB setup. (Requires English version of Windows 98, either first or second edition)

Serial Port – The serial port on the front is designed for initial setup of the card. Null serial cable is required for serial setup.

Your package will also contain one 3.5” diskette and a USB cable.

One 3.5” Diskettes

Your package contains one 3.5” MIB diskette. The diskette contains a USB device driver, USB setup software , User’s

manual, Quick installation and MIB file.

5

Image 9

Contents EPowerSwitch Conventions Used In This Guide Table of Contents Appendix Introduction EPowerSwitch Features Status LEDs SwitchRJ 11 Jacks EPowerSwitch System Package EPowerSwitch System Package ContentsEPowerSwitch System Unit One 3.5 Diskettes Setup via Ethernet port IP SetupUse Web browser to set IP, gateway and subnet Setup via serial port Page Page Use terminal to set IP, gateway and subnet Serial or Telnet ConfigurationIP Address for the ePowerSwitch System and More Setup via USB port Page Telnet Options Ethernet Cascaded Cable. Not Enclose Setup via Ethernet Cascaded CablePPP Configuration ConfigurationRemote operation procedure User Management Software Update EPowerSwitch Configuration Page Scheduled shutdown Set Verify The ePowerSwitch OperationUpgrade Firmware Tftp UpgradeRS232 Serial Port Console Upgrade User data are lost Telephone Interface Telephone access interfaceEPowerSwitch Function ID Address Outlet 01-16 Page Reference AppendixCommunities IP AddressesValue Purpose Subnet masking Subnetting and Subnet MasksRouting and Filtering Gateways NMS Network Management Station GlossaryPage Troubleshooting