Belkin F1D001 user manual Troubleshooting

Page 40

36

Troubleshooting

Problem:	The TES (Terminal Emulation Software) does not display
	anything.
Solution:	Make sure the TES’s communication parameters are correct. They
	should be 115200 baud rate, no parity, 8-data bits, and 1 stop bit.
	The cable is a null serial cable.
PROBLEM:	The NMS cannot ping the ePowerSwitch System.
Solution:	Make sure the network connection to the ePowerSwitch System is
	good.
Solution:	Make sure the cable is in good condition.
Solution:	Make sure to set the Community String
	Name the community with any lowercase name. (A UPS monitors a
	designated community.)
Solution	Make sure to set the Manager Table.

36

Image 40

Contents EPowerSwitch Conventions Used In This Guide Table of Contents Appendix EPowerSwitch Features IntroductionSwitch Status LEDsRJ 11 Jacks EPowerSwitch System Package Contents EPowerSwitch System PackageEPowerSwitch System Unit One 3.5 Diskettes IP Setup Setup via Ethernet portUse Web browser to set IP, gateway and subnet Setup via serial port Page Page Serial or Telnet Configuration Use terminal to set IP, gateway and subnetIP Address for the ePowerSwitch System and More Setup via USB port Page Telnet Options Setup via Ethernet Cascaded Cable Ethernet Cascaded Cable. Not EncloseConfiguration PPP ConfigurationRemote operation procedure User Management Software Update EPowerSwitch Configuration Page Scheduled shutdown Verify The ePowerSwitch Operation SetTftp Upgrade Upgrade FirmwareRS232 Serial Port Console Upgrade User data are lost Telephone access interface Telephone InterfaceEPowerSwitch Function ID Address Outlet 01-16 Page Appendix ReferenceCommunities IP AddressesSubnetting and Subnet Masks Value Purpose Subnet maskingRouting and Filtering Gateways Glossary NMS Network Management StationPage Troubleshooting