On/Off Buttons – control for each of the corresponding rear socket. Press and hold for 3 seconds to setup up the Remote/local control for each of the corresponding rear socket. If you installed an optional NT card inside the ePowerSwitch, there is a delay time for the corresponding outlet of the NT card to off the power for the safe shutdown functionality. The default delay time is set up as 3 minutes.
RJ 11 Jacks
iLink Port – Daisy chain to the another ePowerSwitch client (without NIC).
Ring On/Reset Port – Connect to telephone line for telephone On/Reset control.
Communication Port – Native support on Microsoft NT 4 and 2000 UPS driver. All ports are functional default.
3