MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
3.2RS-232
3.2.1 Launching HyperTerminal
The
Hyper Terminal is only supported by Windows XP. To install and
use Windows XP Mode in Windows 7 please refer to the Microsoft Windows web site
Alternatively, you can download and use the open source Putty terminal software.
To launch Hyper Terminal
▪Connect the PC to the unit with a
▪Select Start > Programs > Accessories > Communications > HyperTerminal.
▪Enter a name and choose an icon in Connection Description window and click OK.
▪In Connect To window, ignore the Country, Area Code and Phone Number fields but select available COM port of PC and then click OK.
▪In COM Properties window, set the parameters as below:
Bits per second (baud rate): 115200 (115200 is default baud rate of
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Bit per second of Hyper Terminal should be set as same as baud rate of
▪Click OK to save the parameters.
▪Go Start > Programs > Accessories > Communications > HyperTerminal, then new icon will be shown. Then select it to launch Hyper Terminal
▪Type the command to control the unit
17
User’s Guide | Rev. 01 |