MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
7.2.3Network setting
▪Sets the IP, Gateway, Subnet mask, MAC address and UDP port number.
▪Requests current network setting.
Command | Description and reply | |
|
| |
NETGW=192.168.1.1! | Sets Gateway address, each data ranges from 000 to 255. | |
Reply: NETGW=192.168.001.001! | ||
| ||
NETIP=192.168.1.118! | Sets IP address, each data ranges from 000 to 255. | |
Reply: NETGW=192.168.001.118! | ||
| ||
| Sets Subnet mask address, each data ranges from 000 to | |
NETSN=255.255.255.0! | 255. | |
| Reply: NETSN=255.255.255.000! | |
NETPA=AA.BB.CC.DD.EE.FF! | Sets MAC address, each data ranges from 00 to FF. | |
| Reply: NETPA= AA.BB.CC.DD.EE.FF! | |
NETPT=3000! | Sets UDP port number, data ranges from 0 to 65535. | |
NETPT=3000! | ||
| ||
| Requests current network setting. | |
| Reply: NETGW=192.168.001.001! | |
NET=?! | NETIP=192.168.001.118! | |
NETSN=255.255.255.000! | ||
| ||
| NETPA=AA.BB.CC.DD.EE.FF! | |
| NETPT=3000! | |
|
| |
Table | ||
7.2.4Monitor output port setting
▪Makes an input connected to the Monitor Output port.
▪Requests input port that is currently connected to the Monitor Output port.
Command | Description and reply | |
|
| |
MON=13! | Makes input 13 connected to monitor output ports. | |
Reply: MON=13! | ||
| ||
|
| |
| Requests current input port that connected to monitor | |
MON=?! | output port. | |
| Reply: MON=13! |
Table
7.2.5EDID control command
▪It stores EDID information in input port of
▪It requests current EDID setting for all input ports.
33
User’s Guide | Rev. 01 |