MatrixPRO-II DVI 16x16 Router
________________________________________________________________________
5.1.1Connect Info
▪Select the connection method to be either RS-232 and Ethernet (UDP) by clicking the corresponding radio buttons
▪For RS-232 control, enter the COM port number of your PC and select baud rate. The baud rate of your PC should be the same as the MATRIXPRO-II DVI 16x16 baud rate. (115200 is default)
▪For Ethernet control, enter the IP address of the MATRIXPRO-II DVI 16x16 and port number. 3000 is the default port number for the MATRIXPRO-II DVI 16x16.
▪Click save button and close Set Config window then click Connect button on PC program of MATRIXPRO-II DVI 16x16 to start it.
▪If the connection is properly made, current status of MATRIXPRO-II DVI 16x16 will be shown at the bottom side of PC program.
25
