Barco 26-1302001-00 manual Contact Information, Technical Support USA

Page 43

MatrixPRO-II DVI 16x16 Router

________________________________________________________________________

12 Contact Information

Barco Inc.

11101 Trade Center Drive

Rancho Cordova, California 95670

USA

Telephone: (916) 859-2500

Fax: (916) 859-2515

Website: www.barco.com

Sales Contact

Direct: (916) 859-2505

Toll Free: (888) 414-7226

E-mail: folsomsales@barco.com

Barco N.V.

Noordlaan 5

8520 Kuurne

BELGIUM

Telephone: +32 56.36.82.11

Fax: +32 56.35.16.51

Website: www.barco.com

Technical Support (USA)

Telephone: (866) 374-7878 — 6 a.m. to 10 p.m. (PST), 7 days per week

E-mail: folsomsupport@barco.com

Online: www.barco.com/esupport

Technical Support (Europe, Middle East, Asia)

Telephone: 0800900410

Online: www.barco.com/support/eSupport.aspx

43

User’s Guide

Rev. 01

Image 43
Contents Manual # Revision MatrixPRO-II DVI 16x16 Matrix Router User’s GuideUser’s Guide Rev Company Address Operators Safety Summary Terms in This Manual and Equipment Marking Cr6+ MatrixPRO-II DVI 16x16 Router Change History Table of Contents MatrixPRO-II DVI 16x16 Router Introduction Key FeaturesShipping Page Front panel of MATRIXPRO-II DVI 16 X Physical DescriptionEdid Configuration Installation InitializationEdid TCP/IP Control SetupLaunching Telnet RS-232 Launching HyperTerminal Unlink mode Front Panel Operation Link modeFunction mode Subnet Mask GatewayIP Address Video Generator Edid ConfigureMAC Address UDP Port NumberPage Hdcp Configure Hdcp ConfigureBaud Rate Reset ModeControl Lock PC Program Operation Basic SetupConnect Info Network Control Lock ModeEdid setup Channel NameOperation Input / output connection Output channel status Web control panel operation Command input structure CommandsInput and output status Examples of command inputs Link input and outputMonitor output port setting Network settingEdid control command Baud rate setting for RS-232 Hdcp SettingLocking type and its Ascii data Control lock commandFirmware update Power-On the MATRIXPRO-II DVI Page Page Hdcp notes Video Inputs SpecificationsWarranty WarrantyTechnical Support USA Contact Information