Barco 26-1302001-00 manual MatrixPRO-II DVI 16x16 Router

Page 10

MatrixPRO-II DVI 16x16 Router

________________________________________________________________________


7.2.2 Input and output status			32
7.2.3		Network setting	33
7.2.4 Monitor output port setting			33
7.2.5		EDID control command	33
7.2.6		HDCP Setting	34
7.2.7 Baud rate setting for RS-232			34
7.2.8		Control lock command	35
8	Firmware update		36
9	HDCP notes		40
10	Specifications		41
11	Warranty		42
12	Contact Information		43

10

User’s Guide

Rev. 01

Image 10

Contents MatrixPRO-II DVI 16x16 Matrix Router User’s Guide Manual # RevisionUser’s Guide Rev Company Address Operators Safety Summary Terms in This Manual and Equipment Marking Cr6+ MatrixPRO-II DVI 16x16 Router Change History Table of Contents MatrixPRO-II DVI 16x16 Router Introduction Key FeaturesShipping Page Physical Description Front panel of MATRIXPRO-II DVI 16 XInstallation Initialization Edid ConfigurationEdid TCP/IP Control SetupLaunching Telnet RS-232 Launching HyperTerminal Unlink mode Front Panel Operation Link modeFunction mode Subnet Mask GatewayIP Address UDP Port Number Edid ConfigureMAC Address Video GeneratorPage Hdcp Configure Hdcp ConfigureBaud Rate Reset ModeControl Lock Basic Setup PC Program OperationConnect Info Channel Name Control Lock ModeEdid setup NetworkOperation Input / output connection Output channel status Web control panel operation Commands Command input structureExamples of command inputs Link input and output Input and output statusMonitor output port setting Network settingEdid control command Hdcp Setting Baud rate setting for RS-232Control lock command Locking type and its Ascii dataFirmware update Power-On the MATRIXPRO-II DVI Page Page Hdcp notes Specifications Video InputsWarranty WarrantyContact Information Technical Support USA