SATO GT408, GT 424e, GT 410 manual Allows the pitch sensor to be activated or deactivated as

Unit 4: Operation

		ADVANCED MODE (4-3)
MENU			DESCRIPTION
			Allows the pitch sensor to be activated or deactivated as
			circumstances dictate.
PITCH SENSOR
ENABLE	DISABLE
			Allows the reference sensor to be selected relative to the media
			type to be used.
SENSOR TYPE
I-MARK1
GAP
I-MARK2
			This feature determines the integrity of the print head elements
			when enabled. A few labels will be printed before a print head
HEAD CHECK			error is displayed.
ENABLE	DISABLE
			This screen will appear if the head check feature has been
			selected. Choose for the head check to be performed
HEAD CHECK
			unconditionally or only when barcodes are being printed.
NORMAL	BARCODE		Previously printed barcodes should be scanned following an
			error to determine their functionality.
			Set this feature to enable or disable the printer’s external signal
			communication port. If the port is enabled, data can be sent and
EXTERNAL SIGNAL			received using an appropriate device plugged into the EXT port.
ENABLE	DISABLE
			Appears only if the printer’s external signal feature has been
			enabled to allow selection of the output signal. For information
EXTERNAL SIGNAL			on which type to choose, refer to the Programming Reference
TYPE1	TYPE2
TYPE3	TYPE4		for guidance.
			Allows configuration as to whether the reprint function may be
			activated via the external signal port.
EXTERNAL REPRINT
ENABLE	DISABLE
			The printer can be set to automatically go into the online mode
			when powered on. Otherwise, the printer starts in the offline
AUTO ONLINE			state and must be manually placed online before it is ready to
YES	NO		print.

SATO GT4xxe Series Operator Manual PN 9001138A Page 4-27