SATO GT408, GT 424e, GT 410 manual Print Cancel Mode, Print Density Default Mode

Unit 4: Operation

		PRINT CANCEL MODE (4-17)
	MENU		DESCRIPTION
			Displays the operational status of the printer. The OFFLINE
			status is displayed on the top line and the label quantity status
			on the bottom. The message will be changed to ONLINE
OFFLINE			whenever the printer is switched online by pressing the LINE
	000000		key.
			Print data that has previously been received, can be cleared. If
			YES is selected, the print data will be deleted and then the
CANCEL PRINT			printer will go offline. If the NO option is selected, the printer will
			go offline without deleting data.
JOB
YES	NO
			This screen indicates that the received data has been deleted.
			Will display for 3 seconds and then the printer will go offline.
CANCEL PRINT
JOB
COMPLETED

			PRINT DENSITY DEFAULT MODE (4-18)
MENU				DESCRIPTION
				Confirms the print head density or appears when switching from
				a print head witrh one density to another.
HEAD CHANGE
08->12 [dot / mm]
YES	NO
				Allows the entry of a password to gain access. Will only display
				if the SET PASSWORD display of the SErvice Mode is turned
PASSWORD				on.
		0000
				Confirms completion.
DEFAULT
SETTING

COMPLETED

PLEASE POWER OFF

SATO GT4xxe Series Operator Manual PN 9001138A Page 4-42