SATO GT408, GT 424e, GT 410 manual Test Print Mode

Unit 4: Operation

	TEST PRINT MODE (4-11)
MENU	DESCRIPTION
	Is the premiere screen of the test print mode. To view this
	screen and access this mode, press and hold the FEED key
	while powering on the printer.
TEST PRINT MODE	• Configuration: The printer’s configuration setting.
CONFIGURATION
	• Barcode: The printer’s installed barcodes.
BARCODE
HEAD CHECK	• Head Check: A pattern to check print head elements.
MEMORY
FONT	• Memory: The contents of the memory cartridge.
FACTORY
	• Font: The contents of the installed fonts.
	• Factory: A factory test label will be printed.
	This screen only appears if Configuration, Barcode, or Head
	Check was chosen in the previous menu. The increments of
TEST PRINT SIZE
	measurement are 1cm.
10 mm

TEST PRINT SIZE

For factory test prints, this screen appears instead of the previous screen for setting print size.

LARGE SMALL	Large (10cm) and small (4cm) print sizes are the only two
	options.

Pressing ENTER will initiate continuous test printing. Pressing

ENTER again will suspend printing.

TEST PRINT

PRESS ENTER KEY

SATO GT4xxe Series Operator Manual PN 9001138A Page 4-36