SATO GT 424e, GT408, GT 410 manual Enable or disable the control of ribbon rewind speed

Unit 4: Operation

	SERVICE MODE (4-19)
MENU	DESCRIPTION

T o enable or disable the control of ribbon rewind speed.

RIBBON TENSION

ADJUSTMENT

ENABLE DISABLE

		When enabled, the printer will monitor ribbon usage and notify
		when the loaded ribbon is low.
FUNCTION KEY
NONE
REPRINT
SBI MODE
		Allows the setting of a function key.
FUNCTION KEY
NONE
REPRINT
SBI MODE
		Allows the backfeed distance to be set. If using thermal transfer
		for printing, set the feed distance less than 30mm to avoid
FORWARD/BACKFEED
		detection of ribbon end by accident.
DISTANCE
DEFAULT	000mm
		Allows selection output mode options. Mode 1 outputs signal in
		the status of existance/non-existance for the number of
EXT 9PIN SELECT
		remaining labels to be printed. Mode 2 outputs signal in the
MODE1	MODE2	status of online/offline.
		Displays the validity/invalidity of command data for print
		darkness, print speed, start point correction, operation mode,
PRIORITY SETTING		print method, and sensor types.
COMMAND	INTERNAL
		Allows the password function to be enabled and disabled.
SET PASSWORD
ON	OFF

SATO GT4xxe Series Operator Manual PN 9001138A Page 4-44