SATO GT 410 Universal Serial BUS USB Adapter, Local Area Network LAN Ethernet, 802.11B Wireless

Page 23

Unit 3: Installation

UNIVERSAL SERIAL BUS (USB) ADAPTER

The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed by the user. It requires a driver (shipped with each printer that has the interface installed) that must be loaded on your PC and the PC must be configured to support USB peripherals using Windows 98 or above. Details for loading the USB driver are contained in the USB Interface Manual that is shipped with each printer with a USB Optional interface installed. Up to 127 devices may be connected to a USB port using powered hubs.

	SPECIFICATIONS
Printer Connector	USB Type B Plug
Cable	10 feet (3 m) maximum
Host	Windows 98 or above with USB Port
Power Supply	BUS Power through cable
Power Consumption	+5 V at 80 ma

LOCAL AREA NETWORK (LAN) ETHERNET

A Local Area Network (LAN) interface is an optional Plug-In Interface Module that can be installed by the user. It requires a driver shipped with each printer that has the interface installed. The driver that must be loaded on your PC and the PC must be configured to run one of the supported network protocols using a 10/100BaseT LAN connection. Details for loading the LAN driver are contained in the LAN Interface Manual that is shipped with each printer with a LAN Optional interface installed.

	SPECIFICATIONS
Connector	RJ-45 Receptacle
Cable	10/100BaseT Category 5
Power Supply	Powered from printer

802.11B WIRELESS

The wireless print server provides easy printer interface with 802.11b Wi-Fi compliant networks free of wired connections. Each printer is shipped with an integrated driver and interface installed. The driver must be loaded on your PC and the PC must be configured to run one of the supported protocols.

	802.11B WIRELESS SPECIFICATIONS
Variable Data Rates		11, 5.5, 2 and 1 Mbps
Frequency Band		2.4 GHz ISM Band
Wired Equivalent Privacy		128 bit, 64 bit (compatible with 40bit), none
Sensitivity		(typ, AAWGN, 8E-2 PER): -91dBm at 1Mbps, -88dBm at 2 Mdps,
		-87dBm at 5.5Mbps, -84dBm at 11Mbps.
Range		100m indoors, 300m outdoors
Protocols		TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI,
		NetBIOS/IP

SATO GT4xxe Series Operator Manual

PN 9001138A

Page 3-9

Image 23

Contents GT408/410/424e Printer Sato America, Inc Table of Contents Maintenance Printer ConfigurationTroubleshooting Introduction Result in Presonal Injury About this Manual1a, Primary Components General DescriptionLCD Display Control FeaturesTechnical Data Processing Physical CharacteristicsPower EnvironmentalInterface Modules RibbonSensing Character Font Capabilities Regulatory Approvals Character ControlBAR Code Capabilties Page Installation Unpacking Unpacking & Parts IdentificationCable Connection Printer InstallationSite Location Media & Ribbon Loading Media Selection3b, Fan-fold Media & Ribbon Loading RS232C Serial Interface RS232C SpecificationsInterface Selection Host Connection DB9 Printer RS232C Serial Interface SignalsPIN Direction Signal Definition Cable Requirements DB9IEEE1284 Parallel Interface SpecificationsLocal Area Network LAN Ethernet 802.11B Wireless802.11B Wireless Specifications Universal Serial BUS USB AdapterACK/NAK Protocol Receive BufferExternal Signal Connector Accessories InstallationPcmcia Memory Expansion Memory ExpansionInterface Upgrade Interface UpgradeLabel Peeler Installation Label Cutter InstallationPrinter Operation Normal Mode Configuration ModesUser Mode User ModeAdvanced Mode Advanced ModeIEEE1284 Interface Setup Mode IEEE1284 Interface Setup ModeRS232C Interface Setup Mode RS232C Interface Setup ModeCentronics Interface Mode Centronics Interface Setup ModeLAN Interface Setup Mode LAN Interface Setup ModeUSB Interface Setup Mode USB Interface Setup ModeCartridge Mode Cartridge Mode10, Sembl Mode Sembl Mode11, Test Print Mode Test Print Mode+ Power Download Mode13, Hex Dump Mode HEX Dump ModeFUNCTION+ + Enter + Power Boot Download Mode15, Data Save Mode Data Save Mode16, Default Settings Mode Default Settings Mode17, Print Cancel Mode Print Cancel Mode18, Print Density Default Mode Print Darkness Default Mode19, Service Mode Service Mode20, Factory Mode Factory ModeMenu Description Normal ModeIs the premiere screen of the Advanced Mode. The Advanced User Mode Print offset refers to the vertical and horizontal shifting Advanced Mode Allows the pitch sensor to be activated or deactivated as Advanced Mode Menu Description Interface Modes 4-4 Through Allows BCC check to be enabled or disabled. Will only appear Allows determination of which method of configuration has OFF with asychronous outputs with Select signal. Will only If any LAN interface is present and the Card option is not Cartridge Mode Sembl Mode Test Print Mode Download Mode HEX Dump Mode Boot Download Mode Data Save Mode Allows selection of data to be initialized Default Settings ModePrint Density Default Mode Print Cancel ModeService Mode Enable or disable the control of ribbon rewind speed Previous printer Confirms copying is in progress. Data entry not required Factory Mode Displays values for the dispenser counter Potentiometer DESCRIPTION/PROCEDURE Operational Adjustments21, Sensor & Accessory Positioning 22, Print Base Reference Position Page Troubleshooting Unit 5 Troubleshooting Alarm sound Three short beeps External signal Machine error Memory Writing error Item Number error Unit 5 Troubleshooting Smeared Print Images Image VoidsLight Print Images Uneven Print DarknessIncorrect Label Positioning Meandering MediaPrinter Creates a Blank Label CHK Troubleshooting Step Interface TroubleshootingLAN Ehternet Interface Hex Dump Mode Test Print TroubleshootingTest Label Printing Test Print ModeSample Test Label Sensor Locations Sensor LocationsMaintenance Cleaning Procedures Print Head Replacement Replacement Procedures1b, Print Head Replacement Platen Roller ReplacementPlaten Roller Replacement Print Head Alignment Adjustment ProceduresPressure Adjustment Media Scale Thickness MM Print Head Pressure AdjustmentBalance Adjustment Print Head Balance AdjustmentRibbon Guide Adjustment Ribbon Guide AdjustmentLabel Sensor Positioning Label Sensor PositioningPotentiometer Adjustments