Star Micronics TSP552 user manual Commands to Control Peripheral Devices, Other Commands

Commands to Control Peripheral Devices

		Control codes		Hexadecimal	Function
ENGLISH				codes
		<FS>		1C	Control peripheral device #1 immediately
		<ESC> <BEL> n1 n2		1B 07 n1 n2	Define drive pulse width for peripheral device #1
		<BEL>		07	Control peripheral device #1
		<EM>		19	Control peripheral device #2 immediately
		<SUB>		1A	Control peripheral device #2 immediately
	Commands to Control Auto Cutter
		Control codes		Hexadecimal	Function
				codes
		<ESC> “d”	n	1B 64 n	Partial-cut command to the auto cutter
	Other Commands
		Control codes		Hexadecimal	Function
				codes
		<CAN>		18	Cancel last line & Initialize printer immediately
		<DC3>		13	Deselect printer
		<DC1>		11	Set select mode
		<RS>		1E	Beep the buzzer
		<ESC> “@”		1B 40	Initialize printer
		<ENQ>		05	Enquiry(Status inquiry)
		<EOT>		04	Near end status inquiry
		<ESC> “?” <LF> <NUL>		1B 3F 0A 00	Reset printer hardware (Perform test print)
		<ESC> “8”	n1 n2	1B 38 n1 n2	Resisters a logo pattern
		<ESC> “9”	n1 n2	1B 39 n1 n2	Prints a logo pattern

– 16 –