Star Micronics TSP552 Appendix a Specifications, General Specifications, Print Specifications

	Appendix A: Specifications
A-1. General Specifications
(1) Printing method	Direct line thermal printing
(2) Print speed	105 mm/s
	Note: Print duty is 16.5% or less.
(3) Dot density	8 dots/mm (0.125 mm/dot)
(4) Number of print columns
	48
(5) Roll paper	Refer to chapter 3 for details on the recommended
	paper.
	Paper width: 80- 1.00 mm
	Roll diameter: ø83 mm or less
	External diameter of core: ø18 +0.50 mm
	Internal diameter of core: ø12 ± 0.5 mm
(6) Cutter	Partial cut (leaving the center of the paper intact)
(7) Sensor	Paper end, cover open, paper near end
(8) Overall dimension	142 (W) × 215 (D) × 149 (W) (mm)
(9) Weight	Approx. 2.2 kg
A-2. Print Specifications
(1) Print width	72 mm
(2) Character size	1.25W × 2.75H (mm)
(3) Column pitch	1.5 mm
(4) Character set	Numeric, alphabet, kana, special, ruled line symbols,
	extended graphic, international, user characters
(5) Character enlargement/reduction
	double width, double height, double size
A-3. Interface
(1) Interface	RS232C serial interface
(2) Command	ESC/POS TM commands or Star commands

APPENDIX

– 95 –