TRENDnet TEW-670APB manual Tools

Page 31

MAC Filter: MAC Filter function controls the MAC of the network devices that are listed in this table for access authorization or denial. There have three choices:

‹Enable / Disable MAC Filters

‹Only allow PCs with MAC listed below to access device

‹Only deny PCs with MAC listed below to access device

The maximum number of MAC addresses that can be stored is 20. User can browse through the MAC address saved by selecting the MAC Filter List.

For any changes made in the security page, click “Apply” for the changes to be effective.

Tools

Four functions are provided in this page, Backup, Restore Settings, Restore default settings and Firmware Upgrade.

Backup Current Setting: Click on “Backup Current Setting” button, which will open a FileSave Dialog box, where users can save the current settings and configurations to a file.

23

Image 31
Contents Page Federal Communication Commission Interference Statement Regulatory Information/disclaimersEN 50385 FCC Radiation Exposure StatementEurope EU Declaration of Conformity EN60950-1EN 301 489-1 V1.6.1 EN 300 328 V1.7.1EN 301 489-17 V1.2.1 0560 Page Table of Content Overview of this User’s Guide About this GuideIntroduction FeaturesSetup Unpacking and SetupUnpacking Status PowerHardware Instalation Front panelAntenna Rear PanelHardware connections Side PanelCheck the installation Connect to the Switch/Hub/RouterLogin to the Wireless AP through Wlan Configuring the Wireless LAN Access PointLogin to the Wireless AP through LAN Set your new password Main Screen of the Access PointWizard Secure your Wireless Network Page Good WEP Save and Restart StatusPage Basic Setting WEP Encryption Rasius Server 1/2 WPA/WPA2-EAP SecurityWPA-PSK/WPA2-PSK Security IP Setting Access Point Mode Advanced Wireless SettingWireless Bridge mode Repeater mode Repeater mode configuration Click Apply SecurityTools Wi-Fi Protected Setup General Technical SpecificationsPhysical and Environmental Network Glossary Page Page Page Page Page Limited Warranty