TRENDnet TEW-670APB manual Repeater mode configuration

Page 29

Repeater mode configuration

Site Survey: This button allows user to enable the Site Survey function to scan for the available wireless networks and establish wireless communications with one. Selected one of them listed to establish communications and click “Apply” button.

Remote AP MAC/SSID: Enter the MAC Address and SSID of the Remote AP who will be repeated.

Beacon Interval: The period of time in milliseconds that AP sends out a beacon. Default is 100 milliseconds.

RTS Threshold: The size of RTS/CTS packet size. Default is 2346 bytes.

Fragmentation Threshold: The number of bytes used for the fragmentation boundary for directed messages. Default is 2346 bytes.

21

Image 29
Contents Page Federal Communication Commission Interference Statement Regulatory Information/disclaimersEurope EU Declaration of Conformity FCC Radiation Exposure StatementEN60950-1 EN 50385EN 301 489-17 V1.2.1 EN 300 328 V1.7.1EN 301 489-1 V1.6.1 0560 Page Table of Content Overview of this User’s Guide About this GuideIntroduction FeaturesUnpacking Unpacking and SetupSetup Hardware Instalation PowerFront panel StatusAntenna Rear PanelHardware connections Side PanelCheck the installation Connect to the Switch/Hub/RouterLogin to the Wireless AP through LAN Configuring the Wireless LAN Access PointLogin to the Wireless AP through Wlan Wizard Main Screen of the Access PointSet your new password Secure your Wireless Network Page Good WEP Save and Restart StatusPage Basic Setting WEP Encryption WPA-PSK/WPA2-PSK Security WPA/WPA2-EAP SecurityRasius Server 1/2 IP Setting Access Point Mode Advanced Wireless SettingWireless Bridge mode Repeater mode Repeater mode configuration Click Apply SecurityTools Wi-Fi Protected Setup General Technical SpecificationsPhysical and Environmental Network Glossary Page Page Page Page Page Limited Warranty