IBM Printing System manual Printer Settings 20 ppm copier

2. Printer Settings (20 ppm copier)

2. Printer Settings (20 ppm copier)

2-1 Procedure for making settings

1

Press the Printer key. The machine will switch to the printer mode.

2

3

Use the “▲” and “▼” cursor keys to select “MENU” and then press the Enter key.

Select the desired setting.

(Refer to “2-2 Menu flow chart” on page 2-3for a list of the various possible settings.)

Note

Settings are categorized into a hierarchy under the “MENU” command. Use the “▲” and “▼” cursor keys to select “MENU” and then press the Enter key to access the menu of available setting items. Once the desired setting is selected, press the Enter key once again.

Change the desired setting.

4 (Refer to “2-3 List of settings” on page 2-7for information regarding each item and its possible settings.)

5

Note

Settings are normally changed (turned ON and OFF, etc.) by using the “▲” and “▼” cursor keys to move the selection cursor (e) and select the desired setting, and then pressing the Enter key.

When it is necessary to type in a value or number directly (such as with a network address or the time, etc.), use the numeric keys to enter the desired information and the cursor left and right keys to change the location of the cursor. Once entry is complete, press the Enter key.

Press the Printer key again to switch back to the copier mode.

2-1