IBM Printing System manual Paper/Output KPDL2 Driver, Paper Size

4. Printer Driver for WindowsNT

4-6 Paper/Output (KPDL2 Driver)

■Paper Size:

Select the size of standard-size paper sheet or envelope. Selection can be made in the “Change ‘Paper Size’ Setting” area. The following standard-size paper sheets and envelopes can be used with this printer:

Standard-size paper	Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" x 8 1/2"), A3,
sheet	A4, A5, A6, Folio (210 x 330 mm), JIS B4, JIS B5, JIS B6
Envelope	COM-10, Monarch, DL, C5

■Orientation:

Select the print orientation from the following: Selection can be made in the “Change ‘Orientation’ Setting” area. The factory default setting is “Portrait”.

[Portrait]	Prints lengthwise.
[Landscape]	Prints widthwise.
[Rotated]	Prints the image upside-down in a “Landscape” (widthwise) orientation.

■Paper Source:

You can select the source of paper feed according to the tray or the desired type of paper. Selection is possible from among the following items. If you select “Automatically Select”, the printer will automatically select the tray that contains the most appropriate paper for the job. The factory default setting is “Automatically Select”.

Paper type	Plain, Transparency, Labels, Recycled, Rough, Letterhead, Color, Envelope,
	Card Stock
Tray	Automatically Select, Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray

*It is necessary to perform the settings under “Page Policy” on page 4-10BEFORE making settings here. If you want to select the source of paper feed according to the type of paper, select “Auto Size Select” there. If you want to select the source of paper feed according to the tray, make sure that “Cassette Base” is selected there.

In addition, if you select “Automatically Select” here, be sure that the “Page Policy” setting is set to “Auto Size Select” or there is a possibility that printing will be accomplished onto paper that is difference the expected.

*20 ppm copier: Tray 3 and Tray 4 are available only when the Option Cassette is installed.

*15 ppm copier: Tray 2, Tray 3 and Tray 4 are available only when the Option Cassette is installed.

*Selection according to the desired type of paper is NOT available in 15 ppm copiers.

4-6