IBM Printing System manual Paper -- More Options Universal Driver, Does not print on both sides

Page 49

3. Printer Driver for Windows 95/98

3-2-1 Paper -- More Options (Universal Driver)

Printing on both sides (duplex printing)

Allows you to set the desired duplex mode. The factory default setting is “None”.

[None]

Does not print on both sides.

[Flip on long edge]

Prints on both sides and binds along the longer edge.

[Flip on short edge]

Prints on both sides and binds along the shorter edge.

*20 ppm copier: Available only when the optional Duplex Unit is installed.

*15 ppm copier: Duplex printing is NOT available.

*Paper sizes and source of paper feed that are acceptable for duplex printing are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330 mm), JIS B4 and JIS B5

Source of paper feed: Any tray EXCEPT the Bypass Tray

Output bin:

Allows you to select the location of ejection and whether you want to staple the copy sets or not when the optional Job Separator or Finisher is installed.

[Inner Tray]

Copies will be ejected onto the Inner tray.

[Job Separator]

Copies will be ejected into the optional Job Separator.

[Finisher(Staple Off)]

Copies will be ejected into the optional Finisher. (Only available in the 20 ppm copiers)

[Finisher(Staple On)]

Copies will be stapled and ejected into the optional Finisher. (Only available in the 20 ppm copiers)

* Paper sizes are acceptable for use with the Job Separator are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330 mm), JIS B4 and JIS B5

* Paper sizes and source of paper feed that are acceptable for use with the Finisher are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), A3, A4, Folio (210 mm x 330 mm), JIS B4 and JIS B5

Source of paper feed: Any tray EXCEPT the Bypass Tray

* Paper sizes and source of paper feed that are acceptable for stapling are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), A3, A4, JIS B4 and JIS B5

Source of paper feed: Any tray EXCEPT the Bypass Tray

Note

If you want to staple your printed sets, be sure to use a Collator driver. (Refer to “Collator driver” on page 1-1.)

3-3

Image 49
Contents Océ Operations Guide Instruction Handbook About this On-Line Manual IntroductionPage Iii Printer Settings 15 ppm copier Printer Settings 15 ppm copierProcedure for making settings Ppm copier Inch version Operation keysPpm copier Metric version List of settings Menu Available settings Remarks Number Menu Available settings Remarks Number Printing resolution Draft Mode ON/OFFBypass mode Wide A4 ON/OFFPrinter reset Receive dump modeResource protect mode Recovery time for Auto ContinuePrinter Settings 20 ppm copier Printer Settings 20 ppm copierPrinter Key Message display Numeric keys Menu Menu flow chartPrinter Settings 20 ppm copier Printer Settings 20 ppm copier Printer Settings 20 ppm copier Network Card Status Page print out on Interface selectionEmulation protocol Item No Display message Available settings Remarks Carriage Return CR handling Line Feed LF handlingReading data Reading program dataDeleting font data Deleting dataDeleting program data Deleting macro dataFormatting the Memory Card Duplex modeForm feed time-out Receive dump mode Memory Card / RAM Disk Memory Card / RAM DiskMemory Card RAM DiskUsing printer control commands Printer control commandsWriting print data ProcedureWriting font data \WINDOWSECHO !R! Rwer S,A,0,ÓFONT1Ó,ÓFONTÓ,45040LPT1 12 3 4Deleting print data or font data Reading print dataAuto Partition List print out ON/OFF Printing out the Partition ListIncluded printer drivers Procedure for Installing and Printing with a Printer DriverDriver type Description Compatible OS Collator driverSystem Conditions Installing the Printer DriversScreen that Appears when the CD-ROM is Inserted Installing the Printer Driver Windows Installing the Printer Drivers Click Yes if so, or click No if not Uninstalling the Printer Driver Printing Making the printer driver settings in WindowsPrinting from the application Windows XL Driver Making printing and property settingsWindows XL Driver Media Tab Custom Media Size dialog box Setting a custom paper sizeLayout Tab Imaging Tab Output Tab Device Settings Tab Administrator Settings User SettingsPrinter Driver for Windows 95/98 Printer Driver for Windows 95/98Opening the Properties Window Paper Tab Universal Driver Media choiceDraft ModePaper source Unprintable AreaPrinting on both sides duplex printing Paper -- More Options Universal DriverDoes not print on both sides Prints on both sides and binds along the longer edgeGraphics mode ResolutionGraphics Tab Universal Driver DitheringPrint qualityManagement Code Device Option Tab Universal DriverPrinter memory Prints lengthwise Paper Tab KPDL2 DriverPrints widthwise More Paper Options KPDL2 Driver Halftoning Graphics Tab KPDL2 DriverSpecial Draft Mode Print featuresDevice Options Tab KPDL2 Driver Available printer memory in KBManagement Code Installable optionsEdge Smoothing PolicyPostScript Tab KPDL2 Driver Printer Driver for WindowsNT Printer Driver for WindowsNTCopy Count Paper/Output Universal DriverPrint on Both Side Duplex Printing Graphic Universal DriverMedia Document Options Universal DriverPaper/Output Print Quality Management CodeInstalled Memory Kilobyte Device Settings Tab Universal DriverPaper/Output KPDL2 Driver Graphic KPDL2 Driver Document Options KPDL2 Driver PostScript Options Printer Features Does not sort PagePolicyDevice Settings Tab KPDL2 Driver Installable Options Printer Driver for Windows2000 Printer Driver for Windows2000Opening the Printing Preference Window Print from 1st OrderPer Sheet N-up AdvancedKPDL2 Driver Paper Source Universal Driver Paper SourcePaper/Output Paper Size Advanced OptionsGraphics Print Quality Document Options Advanced Printing Features Printer Features Draft Mode Selection PagePolicy only available with KPDL2 DriverPostScript Options Optional Disk only available with KPDL2 Driver Device Settings TabPrinter Driver for Macintosh Installing the PPD filesPrinter Driver for Macintosh Required computer environmentWindow shown on the right will appear. Click on Continue Chooser will appear Printer General Dialog BoxPages Layout Direction Layout Dialog BoxBorder Print on Both sidesSmoothing Printer Specific OptionsYou are going to select Auto Select under Paper source Off Does not sort SortRotate Format for Setup dialog Dialog BoxPaper ScaleVisual Effects PostScript Dialog BoxImage & Text New button Custom paper sizes Dialog BoxEdit button Delete button