3. Printer Driver for Windows 95/98
3-7 Device Options Tab (KPDL2 Driver)
■Available printer memory (in KB)
Indicates the amount of memory available for printing. As this is determined according to the amount of memory entered as the “VM Option” setting under “Installable Options”, there is normally no need to change it.
■Print features
It is possible to change the settings related to various printer functions. Select the desired function here and then change the setting in the field under “Change setting for: xxxx”. Functions available for selection are as follows:
●Draft Mode
Saves on toner. The factory default setting is “Off”.
●Paper Destination
Allows you to select the location of ejection when the optional Job Separator or Finisher is installed.
[Inner Tray] | Copies will be ejected onto the Inner tray. |
[Job Separator] | Copies will be ejected into the optional Job Separator. |
[Finisher] | Copies will be ejected into the optional Finisher. (Only available with 20 ppm copiers.) |
*In order to set the location of ejection for the Job Separator or Finisher, it is necessary to first perform the setting for that optional equipment under “Installable options” on page
*Paper sizes and types that are acceptable for use with the Job Separator are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330 mm), JIS B4 and JIS B5
Paper types: Plain, Letterhead, Recycled and Color
* Paper sizes, types and source of paper feed that are acceptable for use with the Finisher are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), A3, A4, Folio (210 mm x 330 mm), JIS B4 and JIS B5
Paper types: Plain, Letterhead, Recycled and Color
Source of paper feed: Any tray EXCEPT the Bypass Tray