IBM Printing System manual Sort, Off Does not sort, Rotate

6. Printer Driver for Macintosh

■Staple:

It is possible to staple your copy sets if the optional Finisher is installed.

*Stapling is only available with 20 ppm copiers.

*The following settings are required before stapling is possible:

(1)Change the “Installable Options” setting in step 9 on page 6-3to the following.

Select “Finisher” as the “Output Device” setting and “RAM Disk” under “Optional Disk”.

(2)“Printer Specific Options” setting on page 6-6.

Select “Finisher” as the “Output Bin” setting and “On” under “Sort”.

*Paper sizes, types and source of paper feed that are acceptable for stapling are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), A3, A4, JIS B4 and JIS B5

Paper types: Plain, Letterhead, Recycled and Color

Source of paper feed: Any tray EXCEPT the Bypass Tray

■Sort:

Allows you to select whether to sort the copies in the case of multiple copy.

[Off]	Does not sort.
[On]	Prints in the order of 1st, 2nd, 3rd copies and so on.

*It is necessary to create a RAM disk. (Refer to step 9 on page 6-3.)

*If you selected any of the “Staple” settings above, it is necessary to select “On” here.

■180 Rotate:

Selecting this option prints upside down.

6-7