IBM Printing System manual Paper Tab Universal Driver, Paper source, Media choiceDraft Mode

3. Printer Driver for Windows 95/98

3-2 Paper Tab (Universal Driver)

■Paper size:

Select the size of standard-size paper sheet or envelope.

The following standard-size paper sheets and envelopes can be used with this printer:

Standard-size paper	Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2"
sheet	x 8 1/2"), A3, A4, A5, A6, Folio (210 x 330 mm), JIS B4, JIS B5, JIS B6
Envelope	COM-10, Monarch, DL, C5

■Orientation:

Select the print orientation from the following:

[Portrait]	Prints lengthwise.
[Landscape]	Prints widthwise.

■Paper source:

You can select the source of paper feed according to the desired tray. Selection is possible from among the following items. If you select “Auto Select”, the printer will automatically select the tray that contains the most appropriate paper for the job. The factory default setting is “Auto Select”.

Tray

Auto Select, Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray

*20 ppm copier: Tray 3 and Tray 4 are available only when the Option Cassette is installed.

*15 ppm copier: Tray 2, Tray 3 and Tray 4 are available only when the Option Cassette is installed.

■Media choice(Draft Mode)

Saves on toner. The factory default setting is “Off”.

■Unprintable Area...

Click this button in order to open the Unprintable Area dialog box and set the area that should not be printed onto.

■More Options...

Click this button in order to open the Paper -- More Options dialog box and then refer to “3-2-1 Paper -- More Options” on page 3-3for more detailed information.

3-2