2. Windows XL Driver
2-3 Layout Tab
■Pages per Sheet:
Allows you to print reduced images of multiple (1, 2, 4, 6, 9, 16 or 25) pages onto a single sheet of paper. This function is called
Example: With
Prints reduced images of 2 full pages onto a single sheet of paper.
■Print Borders
Prints border lines between the different images when the “Pages per Sheet” function is selected.
■Layout
Specifies the order of display of the images when the “Pages per Sheet” function is selected.
■Scaling
Allows enlargement or reduction of the image size.
Note
The image size will normally be enlarged or reduced according to the difference in the setting made in the “Page Size” and “Print Size” fields. If you then change the setting here, the actual magnification will be based on the original settings and the image may be even further enlarged or reduced.
■Print on Both Sides [Duplex]
Select this checkbox by clicking on it and putting a check mark in the box in order to perform Duplex
[Flip on Short Edge] | Select this option when making duplex prints in order to have the image on the two sides of the paper |
| printed in the opposite direction from each other, as though the paper was turned over along its |
| shorter edge. |
[Flip on Long Edge] | Select this option when making duplex prints in order to have the image on the two sides of the paper |
| printed in the same direction as each other, as though the paper was turned over along its longer |
| edge. |
*20 ppm copier: Available only when the optional Duplex Unit is installed.
*15 ppm copier: Duplex printing is NOT available.
*Paper sizes, types and source of paper feed that are acceptable for duplex printing are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330 mm), JIS B4 and JIS B5
Paper types: Plain, Recycled and Color
Source of paper feed: Any tray EXCEPT the Bypass Tray