Fujitsu M3097E+, M3097G+ manual Automatic document feeder ADF button, Size button

The ADF, size, density, resolution, landscape, half-tone, document, and mode 1 and 2 buttons described below are effective unless other- wise specified by the host system.

Automatic document feeder (ADF) button:

Selects whether to feed documents automatically by ADF or manually on the flatbed. When this button is pressed, the lower line is displayed as shown in Screen 1. Each time this button is pressed, “FB” or “ADF” starts blinking in turn, and the read operation status displayed in the upper line changes accord- ingly.

Screen 1 — The upper line shows a typical example.

Upper line

Lower line

A D F A 4	4 0 0	L . >
R e a d : F B	A D F
	Blinking

Size button:

Selects a document size. When this button is pressed, the lower line is displayed as shown in Screen 2. Each time this button is pressed, “DLT”, “LT”, “LG”, “A3”, or “A4” starts blinking in turn, and the size displayed on the upper line changes accord- ingly.

Screen 2 — The upper line shows a typical example.

Upper line

Lower line

A D F L G 4 0 0 L . >

S i z e : D L T L T L G A 3 A 4

Blinking

If the direction indicated on the upper line is “ ”, only “LT” or “A4” can be selected.

2 – 7