5.3.3Cleaning the coupled feed roller
1Pull the ADF lever up to open the ADF.
2Pull the ADF lamp replacement lever up while pushing the lever in the direction indicated by the arrow in Figure 5.4.
3Clean the surface of the coupled feed roller by the cloth with ethyl alcohol.
NOTICE
If the coupled feed rollers are excessively pushed in the direction of the arrow above during cleaning, the automatic document feed performance may be affected.
5.3.4Cleaning the mirror
1Cleaning the mirror:
Remove the glass plate from the automatic document feeder with the same procedure as that for lamp replacement. Do not move the carrier unit during work. Dust may fall on the mirror. When installing the lamp unit, if the automatic document feeder and mirror are dirty, clean them before final installation and before putting the glass plate back on.
2How to clean the mirror:
Wipe the mirror using the blower. When the mirror is very dirty, use a dry cloth or a cloth with alcohol. If the mirror is strongly wiped or dirty cloth is used, the mirror may be damaged.
5 – 4