3.3Connections
Connect the image scanner using the following procedure.
1 Set the power switch to off.
Power switch
2 Connect the power cable.
Connect the power cable to the power inlet on the back of the image scanner. Connect the other end of the power cable to a power outlet.
Power outlet
for North America
Power inlet | Power cable |
for Europe
3 Connect the interface cables (for M3097E+).
Connect the interface cables to the interface connectors and fasten the cables with catches and screws as shown below.
Connect the other end of each interface cable to the host computer.
Back of the image scanner
Interface cable for RS232C
Catches
Screws
Interface cable for video
To the host system
3 – 3