C H A P T E R 2
Switch Installation
This chapter describes how to install and connect a Catalyst 3650 switch. It also includes planning and cabling considerations for stacking switches. Read the topics and perform the procedures in this order:
•Preparing for Installation, page
•Planning a Switch Data Stack, page
•Installing the Switch, page
•Connecting to the StackWise Ports, page
•Connecting Devices to the Ethernet Ports, page
•Where to Go Next, page
For initial switch setup, how to assign the switch IP address, and for powering information, see the switch getting started guide on Cisco.com.
Preparing for Installation
•Safety Warnings, page
•Installation Guidelines, page
•Tools and Equipment, page
Safety Warnings
This section includes the basic installation caution and warning statements. Translations of the warning statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3650 Switch document available at Cisco.com. Read this section before you start the installation procedure.
Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43
Warning Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Statement 48
Catalyst 3650 Switch Hardware Installation Guide
|
| ||
|
|
