2.3.3Buttons and liquid crystal display screen (M3097G+)
Liquid crystal display screen: Displays messages only.
The mode buttons have the following functions:
Mode 1 button: See Section 5.3.4, 5.4 and 5.5.
Mode 2 button: See Section 5.3.4, 5.4 and 5.5.
When error messages are displayed on liquid crystal display screen, press this button to enable the read operation.
2.3.4Messages
Error messages (temporary errors)
If a temporary error occurs in the scanner, one of the following mes- sages is displayed.
P a p e r E m p t y
This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, for the M3097E+, press the stop button, for the M3097G+, press the Mode 2 button.
P a p e r J a m
This message is displayed if a document is jammed in the
ADF. See section 5.1 for removing jammed documents.
A D F – C o v e r O p e n
This message is displayed if the ADF is not closed completely. Close the ADF completely, and enable the read operation.
L a m p – C o v e r | O p e n | ||
|
| P o w e r O f f | ! ! |
|
| ||
This message is displayed if the ADF is open for lamp replacement when the power is on. Turn off the power, and close the ADF completely.