Fujitsu Siemens Computers Point 500, Point 1600 manual Fastening Cradle Module Left Side

14.Tighten the two (size #10) screws, one on each side, that you installed in step 9 to fasten the cradle module to the keyboard tray assembly. To ensure proper alignment, push the cradle module toward the wall as shown in Figure 2-19 and Figure 2-20 while you tighten the screws.

Tighten

Push

Figure 2-19. Fastening Cradle Module (Left Side)

Tighten

Push

Figure 2-20. Fastening Cradle Module (Right Side)

2-26 Assembling and Installing Connectivity Peripherals