Fujitsu Siemens Computers Point 1600, Point 500 manual Confirming External Power Is Supplied

Confirming External Power Is Supplied

All connectivity peripherals (except for the portable port expander) supply power to the pen tablet when the AC adapter is properly connected. To confirm that external power is supplied, place the pen tablet in the connectivity peripheral and observe the Charge Status light on the pen tablet. The Charge Status light should either flash once or turn on continuously (depending on the percent of full charge in the pen tablet’s battery pack) when the pen tablet is initially inserted in the connectivity peripheral. Figure 2-24 shows the status lights on the pen tablet.

MIC Built-in

Microphone

Power

HDD Access

Charge Status

Low Battery

Figure 2-24. Status Lights on the Pen Tablet

Confirming External Power Is Supplied 2-31