Cisco Systems N3KC3524P10G manual Chassis for the Cisco Nexus 3016 Switch

Chapter 1 Overview of the Cisco Nexus 3000 Series Switches

Cisco Nexus 3016 Switch

Se n d d o c u m e n t c o m m e n t s t o n ex u s 3 k - d o c f e e d b a ck @ c i sc o . c o m

•Ports for the Cisco Nexus 3016 Switch, page 1-3

•Power Supply for the Cisco Nexus 3016 Switch, page 1-4

•Fan Tray for the Cisco Nexus 3016 Switch, page 1-5

•Port Connections for the Cisco Nexus 3016 Switch, page 1-5

Chassis for the Cisco Nexus 3016 Switch

The 1-RU Cisco Nexus 3016 chassis (part number N3K-C3016-40GE) is 1.72 inches (4.37 cm) high,

17.3inches (43.9 cm) wide, and 19.7 inches (50.8 cm) deep. This switch is designed for 19-inch (48.3 cm) racks. Its switch ports are at the rear of the chassis in close proximity to server ports, and the power supplies and fan tray modules are accessible from the front for easy replacement. You can order this switch with forward airflow or reverse airflow depending on whether the front of the switch is on a cold aisle (forward airflow) or on a hot aisle (reverse airflow).

Fully populated with two power supplies and a fan tray, the switch weighs 20.5 pounds (9.3 kg) and can be easily installed by one or two people.

Figure 1-1shows the front of the Cisco Nexus 3016 chassis and identifies the components that you use to install and connect the chassis. Figure 1-2shows the rear of the chassis and identifies the components that you use to install and connect the chassis.

Figure 1-1 Front View of the Cisco Nexus 3016 Switch

Cisco Nexus 3000 Series Hardware Installation Guide

1-2 OL-25338-04