Cisco Systems N3KC3524P10G manual Sliding the Chassis Into the Rack

Chapter 2 Installing the Cisco Nexus 3000 Series Switches

Installing the Switch

Se n d d o c u m e n t c o m m e n t s t o n ex u s 3 k - d o c f e e d b a ck @ c i sc o . c o m

Figure 2-4 Sliding the Chassis Into the Rack

	Align the two rear rack-mount guides with the		Front-mount brackets.
	slider rails installed in the rack.	3
2	Slide the rack-mount guides onto the slider		Mounting rails on rack or cabinet posts.
	rails until the front rack-mount brackets come
	in contact with the front rack-mount rails.	4
	c. Holding the chassis level, insert two screws (12 -24 or 10-32, depending on the rack type) in each
	of the two front rack-mount brackets (using a total of four screws for the two brackets) and into
1	the cage nuts or threaded holes in the vertical rack-mounting rails (see Figure 2-5).

Cisco Nexus 3000 Series Hardware Installation Guide

OL-25338-04 2-9