Chapter 2 Switch Installation
Mounting the Switch
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378
Caution Do not wall-mount the switch with its front panel facing up. Following safety regulations, wall-mount the switch with its front panel facing down or to the side, to allow sufficient airflow and to provide easier access to the cables.
Figure 2-13 Wall-Mounting with a Magnet
3
2
1
209025
Switch with the mounting tray attached | 3 Metal wall |
Magnet
Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm) Statement 1076
After you mount the switch, see the “After Installing the Switch” section on page 2-31for information about configuring the switch.
| | Catalyst 3560-C and 2960-C Switch Hardware Installation Guide | | |
| | |
| OL-23803-02 | | | 2-17 | |
| | | |
