Cisco Systems N55M4Q manual Desk or shelf Screws Screw template Adhesive

Chapter 2 Switch Installation

Mounting the Switch

Figure 2-3 Installing the Mounting Screws Under a Desk or Shelf

1

2

3

3

1	Desk or shelf	3	Screws
2	Screw template	4	Adhesive

4

250146

Step 4 Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three screw template slots.

Step 5 Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw template.

Step 6 Remove the screw template from underneath the desk or shelf.

Step 7 Place the switch upside down onto the mounting screws, and slide it forward until it locks in place. See Figure 2-4.

Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm) Statement 1076

Catalyst 3560-C and 2960-C Switch Hardware Installation Guide

OL-23803-02 2-9