Cisco Systems N55M4Q manual Attaching the Cable Guard to the Switch

Chapter 2 Switch Installation

Installing the Cable Guard (Optional)

Step 2 Use the supplied number-10 pan-head screws to attach the cable guard to the switch. See Figure 2-29.

Figure 2-29 Attaching the Cable Guard to the Switch

1

2

MODE

CONSOLE

SYST STAT DPLX SPD PoE PD

1
	2		3						Catalyst	2960-C
				4	5						Series
						6	7
								8
POWER
	OVER	E
		THERNET						1			2

PD

208916

3

1

2

Switch

Cable guard

3

Two number-10 Phillips pan-head screws

Step 3 Loosen the number-10 Phillips pan-head screws, slide the cable guide out, and pivot it upwards so that you can install the cables. See Figure 2-30.

Figure 2-30 Pivoting the Cable Guard Upwards

2

	SYST
	STAT
	1
		2	3						Catalyst	2960-C
				4	5						Series	PD
	PD					6
CONSOLE							7
								8
								1			2

1

208917

1

Cable guard

2

Pivot direction for cable guard pivots

Attach the cables to the switch. See Figure 2-31.

	Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
OL-23803-02		2-29